Viscose Rayon Manufacturing Process



Introduction:
Viscose rayon can be found in cotton-like end uses as well as silk-like end uses. Viscose rayon is the oldest commercial man-made fiber. It is naturally regenerated cellulosic based material such as wood pulp, cotton, linters. etc the degree of polymerization is 400 to 700 and the chemical structure of viscose resembles to cotton to be specific cellulose.

What are the steps involved in the manufacturing of viscose rayon?
The manufacturing of viscose rayon involves following steps, let us study them in the order they are performed:
  • Steeping
  • Shredding
  • Ageing
  • Xanthation
  • Ripening
  • Preparation of spinning solution
  • Filtration
  • Spinning


The figure shows the production of Viscose rayon fiber in brief. Take a look at the detailed process:

Manufacturing process of Viscose Rayon
Fig- Viscose Rayon Fiber Production
   
Steeping:
Steeping is the very first step in the manufacturing of viscose. In this process, the pulp is treated for mercerization in presence of NaOH at the mercerizing strength. The pulp sheets are then steeped (immersed) in 18% NaOH. Alkali cellulose is generated as product during the reaction.

Shredding:
During shredding, the alkali sheets are then converted in light fluffy mass with the help of a machine which consists of a pair of revolving blades rotates at a high speed in the opposite direction.

Ageing:
The crumbs obtained at the end of the shredding procedure are transferred to a steel container where they are stored under specific temperature for 3 to 72 hours which may vary according to the catalyst and the alkali. The presence of air in the alkali reduces the chain length which in turn decrease the viscosity as it is essential to prepare the desirable spinning solution. As soon as the correct viscosity is obtained these pieces are then transferred into a drum where it is kept in inert atmosphere and kept at low temperature.

Xanthation:
During the process of xantation the aged alkali cellulose crumbs are placed in vats and are allowed to react with carbon disulphide under controlled temperature 20-30 degree Celsius which forms cellulose xanthate.

Ripening:
In this process, the viscose is allowed to ripen for a stipulated period of time. During ripening, two major processes takes place firstly, the xanthate groups are redistributed and then lost.  The viscosity of the solution first decreases and then rises to its original value.

Preparation of spinning solution:
The spinning solution contains the following:
  • Water-69%
  • Zinc sulphate-1%
  • Sodium sulphate-18%
  • Glucose-2%
  • Sulphuric acid-10%

The sodium sulphate precipitates the dissolved sodium cellulose xanthate. The sulphuric acid converts xanthate into cellulose, carbon disulphide and sodium sulphate. The glucose provides softness and pliability to the filaments whereas zinc sulphate helps in adding strength.

Filtration:
The viscose is filtered to remove undissolved materials that might disrupt the spinning process or cause defect in the rayon filament.

Wet Spinning:
In this process, the ripened viscose solution passes through a centrifugal pump due to pressure exerted on the solution by the compressed air. Then viscose solution is forced through a spinneret which has many fine holes with diameters ranging from 0.05- 0.1mm, as soon as a number of filaments emerge from the spinneret they are taken together to surface of the spinning bath and then it is guided to two roller from where they are wound on to a spindle. 

Post a Comment

6 Comments

  1. CONGRATULATIONS ,FOR INFORMATIVE ARTICLE ON VISCOSE RAYON.THE USE OF RAYON IS INCREASING DAY BY DAY DUE TO COSTLY PURE SILK YARN. WE HAVE TENCEL FILAMENT YARN [NEW & INNOVATIVE PRODUCT] WIDELY USE IN PREMIUM HIGH FASHION TEXTILES.

    AMIT GANDHI.

    ReplyDelete
  2. Why broken filament generate during wet rayon spinning process

    ReplyDelete
  3. Thanks to the Owener of this website. I like to read your blogs almost all the time. I also post such informative yarn and Tarpaulin blog. You can come and see.Blog info-zigma.co.in

    ReplyDelete
  4. Hello, thanks for your work.

    Do you know if the glucose was introduced in a solid form or liquid (glucose sirup) ?

    ReplyDelete